The way to repair the gimbal is as follows:ġ) Remove the camera module from the damaged gimbal (after removing the white camera body) - the camera module is attached to the frame with 3 screws, this module will be installed in the new gimbal frame,Ģ) Remove the two plastic cable covers (each of them is fixed with one screw), then dettach the plugs of the power strip for the motor modules,ģ) The next step is quite difficult: very carefully peel off the gimbal flex - it should be done very gently (personally, I advise against heated, but you can moisten a little with isopropyl alcohol the flex itself - this should make it easier to peel the flex from the motor body). This is untrue - the passive components (resistors, capacitors, etc.) visible on the top of the motor boards are only part of all the motor electronics, which are located on the bottom of the board: Regarding the last point : I found information that the motor power modules in the gimbal do not have components capable of storing the motherboard key. Replacing just the camera module alone will result in a camera view, but will fail to calibrate the gimbal.

In my drone all elecotronic parts (motherboard, ESC, camera module, gimbal two motor electronics are from originaly mounted parts - so they are original part from my drone, only gimbal frame and flex are exchanged. Unfortunately, repositioning such an assembly to the drone is not possible because:ġ) the camera module is paired with the drone's motherboard,Ģ) each of the modules powering the motors in the gimbal is also paired with the drone's board. In addition, the tape connecting the gimbal to the ESC board (a vertically mounted board in the compartment behind the gimbal and camera assembly) was broken.Ī complete camera and gimbal assembly was purchased by me to make the repair possible. In my drone, the gimbal was mechanically damaged (broken L arm) and the main arm was damaged. There is a great deal of conflicting or even confusing information on the Internet regarding whether such a replacement is possible. So let us accompany You on Your way through our store.Yesterday I made a successful replacement of the gimbal in the Parrot Anafi drone, so I decided to share my experience with other users of this drone. Sounds good, right? Thats good for You and good for us. If many visitors leave our site during the purchase process while choosing the payment method, we know that something is wrong and can improve it. So let us accompany You on Your way through our store. Nor do we pass this data on to Google, we don not have them not at all! Nevertheless, this data of SOMEONE will provide us with valuable information about our site, we want You to like everything here, that You feel good and - of course - buy our products. We do not know who You are, whether You are male or female, how old You are, how Your weight is - no idea.

But look at it: we do not even know who YOU are, we just see that SOMEONE looks at our pages, how he/she does that, how long this SOMEONE lingers on the respective pages, etc. That sounds dramatically to You, we know. Why do we have to do that? Quite simply, you have forbidden us to watch Your steps on our site with Google Analytics. Too bad, now we have to go back to the glass ball or read in the coffee grounds to understand our visitors.

Parrot drone replacement parts